A security alarm is a system designed to detect intrusion - unauthorized entry - into a building or area. Security alarms are used in residential, commercial, industrial, and military properties for protection against burglary (theft) or property damage, as well as personal protection against intruders
Wired burglar alarm consoles and accessories
Hardwired Burglar Alarm systems are those that have the devices wired directly to the control panel. There is nothing more dependable than a pair of copper wires to send a signal from point A to B.
The Burglar Alarm control panels range from small compact type and can accommodate a few different types of Sensors (detectors) to a more advanced type which can perform more complex functions like, automatic dialing to a phone, cellular phone and convey a pre-recorded message informing about intrusion, in addition to or in place of, local audio visual alarm. The advanced burglar alarm versions also have the capability of functioning with user codes for arming and disarming and of switching over to built-in power supply in case of power failure. Many control units also use remote controls for arming or disarming of the control unit. For larger installations that have more sensors, there is provision of additional Zones.
Each Zone is associated with one or more sensors e.g. one floor could be controlled by one Zone. The advantage of Different types of Zones is that when the alarm goes off (alarm sounds), the control panel gives an indication as to which Zone has been compromised. This way one has to only check the sensors linked to that particular zone to see where the problem is.
Burglar Alarm control panel is the brain of your security system. It is typically placed in an area that is out of the way like a basement, attic, closer or office. The motherboard and additional components such as radio receivers, backup power supply and zone expanders are inside this box which is often locked.
Modern burglar alarm incorporate GSM modules and with the use of a SIM card the owner can call in the secure premises and have a two-way conversation. The GSM module can also be used to control PGMs (Programmable Outputs) which can in turn be used to turn on or off your applicances /heating/ Air conditions etc
Full Product Range & SpecsELDES-product-catalog-2015-05-21-EN.pdf